08-24-2004 01:36 PM
It seems that I will sometimes get the "Page cannot be displayed" message - when I click refresh, it comes back ok.
I am just in testing stage but this seems odd to me. The config is very basic.
Any Ideas.
08-25-2004 12:16 AM
euh ... ? maybe you could tell us what devices you are using.
If a cache engine, an error on the server or the client will create a bypass entry [you can see it with 'sho bypass ...] and the refresh will bypass the cache and therefore work with no problem.
But this is assuming you're talking about a cache which you did not specify.
Gilles.
08-25-2004 03:52 AM
Sorry about that. I am using a CSS 11501. Here is a sample of the config.
service e2e-H
ip address 10.161.48.44
active
exit
service e2e-AMP
ip address 10.161.48.10
active
owner E2E
content E2E-WEB
vip address 192.168.128.211
port 80
add service e2e-H
add service e2e-AMP
active
08-25-2004 05:41 AM
This is a L4 rule, so packets are simply forwarded to the servers - no ip spoofing from the CSS.
With this kind of issue, the best is to capture sniffer trace on the server side.
So which device did not respond or dropped a packet.
Regards,
Gilles.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide