06-26-2012 11:22 PM
Hi ,
Could some one explain "sh arp" command in ACE.
Example:
================================================================================
IP ADDRESS MAC-ADDRESS Interface Type Encap NextArp(s) Status
================================================================================
172.16.161.4 e1.5f.b9.a1.b8.ab vlan1301 INTERFACE LOCAL _ up
172.16.161.5 e1.5f.b9.a1.61.1d vlan1301 LEARNED 157 13287 sec up
172.16.161.51 10.50.56.a6.00.04 vlan1301 RSERVER 16 82 sec up
172.16.161.253 10.0b.fc.fe.1b.01 vlan1201 NAT LOCAL _ up
172.16.163.4 e1.5f.b9.a1.b8.ab vlan1303 INTERFACE LOCAL _ up
172.16.133.249 10.00.0c.07.ac.01 vlan1299 GATEWAY 37 14 sec up
whats is
1) Interface local ?
2) Learned ?
3) RSEVER ?
4) NAT Local ?
5) Gateway ?
and when can or how do we use this table for ?
06-27-2012 01:35 AM
Hi Rajkumar,
1) Interface local ? <<< IP address on that particular VLAN >>>
2) Learned ? <<< IP learned outside of ACE >>>
3) RSEVER ? <<< Real server ARP entry >>
4) NAT Local ? << It should be Natted IP which is from NAT pool of ACE >> ( Need to check )
5) Gateway ? << Of course the default gateway >>>
Hope that helps.
regards,
Ajay Kumar
06-27-2012 01:57 AM
Ajay ,
could you please explain some more on " Learned" parameter
if possible some example
Thank you
06-27-2012 02:10 AM
Hi Rajkumar,
For example:
10.10.10.10 00.50.56.b4.6a.ee vlan124 LEARNED 4 5320 sec up
(Ip of the client or any system which tried to contact VIP or ACE ) MAC address : 00.50.56.b4.6a.ee
It is reachable from VLAN 124. It is learned address. It is up from last 5320 seconds.
hope that helps.
regards,
Ajay Kumar
06-27-2012 02:16 AM
Thank you very much Ajay..
i got it , Good explanation !!..
Regards
Raj
06-27-2012 02:37 AM
Good to hear that. Thanks.
regards,
Ajay Kumar
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide