06-27-2011 04:26 AM
Hello
Does anybody know how to figure out the reason why I can see a lot of failures in the show serverfarm output
sh serverfarm test
serverfarm :test, type: HOST
total rservers : 4
---------------------------------
----------connections-----------
real weight state current total failures
---+---------------------+------+------------+----------+----------+---------
rserver: test-app-1
192.168.81.76:0 8 OPERATIONAL 15 2717 1535
rserver: test-app-2
192.168.81.68:0 8 OPERATIONAL 16 3586 2234
rserver: test-app-3
192.168.81.69:0 8 OPERATIONAL 10 1978 1034
rserver:test-app-4
192.168.81.70:0 8 OPERATIONAL 8 3545 1847
There are some useful ace's commands for troubleshooting but all of them show the information for all the serverfarms, not for the particular one.
Thank you in advance for your help.
Regards
Lukas
Solved! Go to Solution.
06-27-2011 06:08 AM
Hi Lukas,
I'm afraid you won't find any magic command to find the reason for these failures. The best approach would probably opening a TAC service request to have this investigated further.
Regards
Daniel
06-27-2011 06:08 AM
Hi Lukas,
I'm afraid you won't find any magic command to find the reason for these failures. The best approach would probably opening a TAC service request to have this investigated further.
Regards
Daniel
06-27-2011 06:33 AM
I hoped that there is some easirer way to find it out, but thank you
Regards
Lukas
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide