show serverfarm issue

[lukaszkhalil]

Hello

Does anybody know how to figure out the reason why I can see a lot of failures in the show serverfarm output

sh serverfarm test

serverfarm     :test, type: HOST

total rservers : 4

---------------------------------

                                                ----------connections-----------

       real                  weight state                  current      total      failures

   ---+---------------------+------+------------+----------+----------+---------

   rserver: test-app-1

      192.168.81.76:0       8      OPERATIONAL  15         2717       1535

   rserver: test-app-2

      192.168.81.68:0       8      OPERATIONAL  16         3586       2234

   rserver: test-app-3

       192.168.81.69:0       8      OPERATIONAL  10         1978       1034

   rserver:test-app-4

       192.168.81.70:0       8      OPERATIONAL  8          3545       1847

There are some useful ace's commands for troubleshooting but all of them show the information for all the serverfarms, not for the particular one.

Thank you in advance for your help.

Regards

Lukas

[Daniel Arrondo Ostiz · Accepted solution]

Hi Lukas,

I'm afraid you won't find any magic command to find the reason for these failures. The best approach would probably opening a TAC service request to have this investigated further.

Regards

Daniel

[lukaszkhalil]

I hoped that there is some easirer way to find it out, but thank you

Regards

Lukas