Hi Giles,
I've been trying to setup TACACS on the two SSL Modules that we have.
The config on both are the same, and so are the firmware versions:
Version 12.2(11)YS1
The config used for getting TACACS to work i've used is:
aaa new-model
aaa authentication login default group tacacs+ enable
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
tacacs-server host 130.194.8.47
tacacs-server directed-request
tacacs-server key xxx
This worked on one of the modules (clay1-ssl), but not on drc1-ssl!
The message i get in the logs are:
%TAC+: no address for get_server
%TAC+: no address for get_server
What does this mean?
Unlike clay1-ssl, i don't see any connection traffic:
acacs+ Server : 130.194.8.47/49
Socket opens: 0
Socket closes: 0
Socket aborts: 0
Socket errors: 0
Socket Timeouts: 0
Failed Connect Attempts: 2
Total Packets Sent: 0
Total Packets Recv: 0
Expected Replies: 0
No current connection
Any insights would be most useful.
thanks
Sheldon
