10-03-2007 10:22 AM
icmp reply isn't displayed if I enter tracert command from a client pc to a router through ACE module.
it's displayed as ***** (not a ACE ip addr).. I think ACE module wasn't confugured to send any icmp trace reply..
How can I configure ACE to receive icmp trace-reply of ACE module ?
10-03-2007 11:41 PM
documented here :
Using Traceroute on the ACE-Configured IP Addresses:
10-04-2007 12:43 AM
I aleady configured for allowing icmp protocol in management class-map..
like this
class-map type management match-any MGMT_CLASS
2 match protocol telnet any
3 match protocol icmp any
4 match protocol ssh any
policy-map type management first-match MGMT_POLICY
class MGMT_CLASS
permit
Perhaps I guess it's need to configure more..
10-04-2007 03:37 AM
please read carefully the document.
Not all traceroute will work.
Are you tracing to a vip address, an interface address or an address behind the ACE module ?
The policy you showed is only for icmp traceroute [not the udp version] and to the interface address.
Gilles.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide