I have a problem with Cisco cache engine module nm-ce-bp in a 2811 router with ACNS 5.5 At present it is doing transparent caching .The problem is that source IP address of the packet showing up on our firewall shows as cache engine IP address instead of client IP address. I enabled ip spoofing and the firewall still shows the caching engine ip address as the source ip address
caching engine config
wccp router-list 1 10.20.0.1
wccp port-list 1 80
wccp web-cache router-list-num 1
wccp service-number 95 router-list-num 1 port-list-num 1 application cache hash-source-ip
match-source-port
wccp version 2
wccp spoof-client-ip enable
router wccp config
ip wccp 95
ip wccp web-cache
interface Ethernet1
<<<*** Interface connected to the external gateway.
ip address 10.1.1.203 255.255.255.0
ip wccp web-cache redirect out
media-type 10BaseT
!
interface Ethernet2
<<<*** Interface connected to the clients.
ip address 10.20.210.1 255.255.255.0
ip wccp 95 redirect out
media-type 10BaseT
!
interface Ethernet3
no ip address
media-type 10BaseT
!
interface Ethernet4
no ip address
shutdown
media-type 10BaseT
!
interface Ethernet5
no ip address
shutdown
media-type 10BaseT
!
interface FastEthernet0
<<<*** Interface connected to the Content Engines.
ip address 10.20.0.1 255.255.255.0
ip wccp redirect exclude in
full-duplex
!
is it possible to get the client ip address as the source ip or is this just the way transparent redirection works
cheers for any info
