Transprent Caching in One Cache server and Two CSMs ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-29-2005 10:44 PM
Hi.
I configured Transparent caching network with one cache server and two CSMs.
Each CSMs redirect WWW traffic to cache server. but cache server return traffic to one CSM#1.
In this situation, client which go through CSM#2 can't open Web page.
But client which go through CSM#1 can open well.
Each CSM is independent.
one traffic is : Can open page well
Client -> CSM#1 -> Cache server -> CSM#1-> Webserver -> CSM#1 -> Cache server -> CSM#1 -> Client
the other traffic is : Can't open page
Client -> CSM#2 -> Cache server -> CSM#2 -> Werbserver -> CSM#2 -> Cache server -> CSM#1 -> Client
thanks.
- Labels:
-
Application Networking
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-03-2005 04:55 AM
You can configure CSM for fault tolerance. If it is not working it could probably because of a configuration error.
Have a look at the following URL which explain the configuration of CSM for transparent caching and also the configuration of CSM for fault tolerance. That is when you have more than one CSM what needs to be done. Hope you will find these useful.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/csm_3_1/modes.htm#wp1025611
