unable to set CSS management port to 100Mbits-FD.

[clayton-price]

This is the first time I've encountered this problem. Thanks in advance!

CSS 11501 running code 7.30.1.06.

Below is the error I receive:

ARLTRKBAXPS1001(config-if[Ethernet-Mgmt])# phy 100Mbits-FD

^

%% Command is not available on Cirrus Logic Ethernet-Mgmt port.

[Gilles Dufour · Accepted solution]

this is normal.

As indicated by the message, the CSS11501 does not support this setting on the ethernet management port.

Only possible to us 10Mb either full or half duplex.

Regards,

Gilles.

[clayton-price]

Thanks Gilles. That's what I figured, it just seemed a bit strange since the other CSS's we have support 100Mbit on the managment port.