10-04-2011 07:58 AM
Hi guys,
I have an WAVE-7371-K9 with WAE-INLN-4CG.
Is there any way to use both modes inline (in-path) and WCCPv2 Interception at the same time in this appliance ?
I think you can use just one mode (in-path or off-path), but I wanna confirm that
Thanks in Advanced
My Best Regards,
Andre Lomonaco
Solved! Go to Solution.
10-04-2011 08:01 AM
Hi Andre,
You can only use one interception method, Either WCCP or INLINE on any WAAS device. Thank you.
Ahsan
10-09-2011 10:24 PM
hi lomonaco
yes ahsan, is Right, you can use only one interception method, Either WCCP or INLINE, But For INLINE Feature you need Inline Card which got Supported in Your Device.
Also There is NO Need To have Same Interception Method to be used if you are Using Waas Devices in Two or more Branches.
Thanks
A.Dixit
10-04-2011 08:01 AM
Hi Andre,
You can only use one interception method, Either WCCP or INLINE on any WAAS device. Thank you.
Ahsan
10-09-2011 10:24 PM
hi lomonaco
yes ahsan, is Right, you can use only one interception method, Either WCCP or INLINE, But For INLINE Feature you need Inline Card which got Supported in Your Device.
Also There is NO Need To have Same Interception Method to be used if you are Using Waas Devices in Two or more Branches.
Thanks
A.Dixit
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide