VSERVER with two SERVERFARMS

[e.leberos]

Hi all,

I have one  “serverfarm1 ” which belongs to vserver “Vserver1” with VIP ip address 192.168.18.211 and listens on port 4050.

The request is these real servers to have access to a  VIP ip address (192.168.18.216) of a second vserver "Vserver2" on port 8080.

Vserver2 has already a serverfarm and having in mind that only one server farm is allowed per Vserver it's seems a little complicated.

What i am thinking is to create a new Vserver let's say "Vserver3" with the same VIP and port .Is this possible?Could you suggest any other solutions.

The CSM is configured in Router mode.

Thanks,

[Kanwaljeet Singh]

Hi Elias,

So if i have understood correctly, real servers in "serverfarm1" need to access VIP 192.168.18.216 on port 8080 and  there is already a serverfarm associated with Vserver2. This would be no different than normal load balancing other than the fact that here the client is a server which belongs to another serverfarm and is accessing VIP which will loadbalance the request to another set of servers in a different serverfarm.

Regards,

Kanwal