Application Networking

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco UCS X-Series Energy Efficiency Offer

 

Forum Posts

Just set up a pair of GSS 4492's from scratch.Configured DNS rules w/ domain list, answer groups, and answers according to the config guide on CCO.When I do a "nslookup" against the GSS for a test entry, I don't get any result.Hitcount under Monitori...

huangedmc by Level 3
  • 1347 Views
  • 6 replies
  • 0 Helpful votes

HiI captured some TCP comunication because there is a issue with long respons of some application.I see in some TCP packets using Wireshark:window size value:593{Calculated window size: 151808}{Window size scaling factor: 256}Can this values indicate...

Resolved! L2 egress method

Hello everyoneLooking at upgrading a setup to WAAS 5.X with Nexus 7k as WCCP router.Since the 7k does not support the GRE egress method to preserve path affinity, does the L2 egress method solve this issue?I'm thinking in the sense where optimized tr...

Patrik S by Level 1
  • 1975 Views
  • 3 replies
  • 0 Helpful votes

HiSay, for example, I am deploying a large amount of VLANs with a vPC toology.  So I would have no spanning tree loops.  Logically my topology looks like a single Core switch to Access switch link.  However, ideally I would like to only allow specifi...

Hi,We are getting "Certificate is near expiration" alarm on more than  200 WAEs . Instead of deleting the expired certificates manually from each device,how to delete this alarms/certificates on all the devices from WAAS CM ?Please advice..Regards,Am...