Hi fellow Professionals, we are planning to implement a VxLAN EVPN Multisite solution between 2 x customer DCs using N9ks as the Border gateways (BGW) / <No ACI>. The BGWs will be connected to their site local legacy Core and will connect back to back to each other. Here is the white paper for it - NextGen DCI with VXLAN EVPN Multi-Site Using vPC Border Gateways White Paper - Cisco
My questions is - for the vlans/bridge-domains that get layer 2 extended between the two DCs over the DCI, are we able to achieve active/active anycast distributed GW? In other words, lets say if the default-gw for that vlan is x.x.x.1, then can it be present local in both the DCs so that the vms use their site local gateway? <Just how ACI does it for a extended BD in Multi-site setup>
