cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
585
Views
0
Helpful
2
Replies

WAAS CIFS enabled but Shutdown-- cannot clear.

I first became aware of a problem because a preposition was failing to one site, not even starting

then on the WAE (sr910 on 3945) running 5.1.1h see this

'show acc cifs

Accelerator     Licensed        Config State    Operational State
-----------              --------          ------------           -----------------
cifs                     Yes             Enabled               Shutdown

AS per other posts:  cleared the licenses, and added them again, this seemed to put the WAE in a bad state,

So from the router did a

Service-module sm1/0 shutdown then a reload, then booted up ok

but when back online cifs still in the same state as above.

 

the funny thing is when I look the traffic summary on the central manager for that Wae, it sees Cifs traffic still being optimized

but I guess that must be using other algorithms

I have even downloaded the 5.1.1h code to the wae and reloaded made no difference.

 

Any ideas??


 

2 Replies 2

Gaurav Kumar
Cisco Employee
Cisco Employee

Hi,

 

is SMB AO enabled ? CIFS and SMB are mutually exclusive.

 

Thanks

Gaurav

Gaurav,

no SMB is disabled, that was one of the first things I checked

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: