cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
601
Views
0
Helpful
1
Replies

WAAS - Dropping TCP Traffic

rm2017
Level 1
Level 1

I'm having issues with TCP traffic between my edge and my core. Using L2 redirection at my edge with a 4507 (l3) and L2 redirection at my core with a 6500Sup720. I have a dedicated VLAN for my WAE's at both sites.

I issue the 'sh tfo connection summary' on my Core WAE and I see the following:

Local-IP:Port Remote-IP:Port ConnType

HostAIP:45056 HostBIP:80 PT AD Int Error

Does anyone know what the 'PT AD Int Error' indicates?

1 Reply 1

Zach Seils
Level 7
Level 7

Michael,

We'll need to collect some additional information to determine what is going on. Can we start with the following (assuming you can reproduce the condition):

1. Change the disk logging level to 'debug':

conf

logg disk prior debug

end

2. Enable TFO AD debugging;

debug tfo conn auto

3. Disable the debug:

un all

4. Send me the syslog.txt file from the local1 directory.

Would it also be possible to collect a packet capture from the WAE showing this state?

Thanks,

Zach

Review Cisco Networking for a $25 gift card