Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Looking at deploying Cisco ASA on AWS. Does anyone have any experience with this in general and from a licensing standpoint? The ASAv is available with a 'Standard Package' and a BYOL option. Trying to find out what exactly the standard package wi...
At a high level I have the following scenario:Client-EdgeWAE-(WAN)-CoreWAE-6500-FWSM-External HostActually have 2 core 6500's with FWSMs and a single WAE core device (4.1.3). I have VLAN 100 assigned to the FWSM as the inside interface. Doing inbou...
I have redundant 6500 Sup720's in my core and a 4.1.3 Core WAE.I'm using generic-gre as my return method and have the tunnel interfaces configured on my 6500's. Everything works fine, but anytime I make a change such as adding ip wccp 61 redirect in...
In the scenario with hub and spoke topology w/ 2 hubs - what is best method to prevent the spokes from becoming 'transit' networks/routers for other spokes?
Is it also feasible to have 2 Area 0s across the WAN - for process connected to ISP A going...
Zach - The FWSM route to the edge networks point to the VLAN 100 HSRP address on the 6500's.I can't provide the entire configs, but can probably post the relevant pieces.Thanks.-Mike
