I have two front end mail servers. I currently use the CSS to balance / failover OWA. I would like to set up the same thing for SMTP traffic as well. Can this be done? If so, is their a general template i can use for configuation assistance?
Hi !I am trying to configure server-initiated connections. As the server needs to access several destinations - I need to configure a default gateway.I did:vlan 110 clientip address 172.16.110.253 255.255.255.0gateway 172.16.110.50alias 172.16.110.25...
I'm having issues with TCP traffic between my edge and my core. Using L2 redirection at my edge with a 4507 (l3) and L2 redirection at my core with a 6500Sup720. I have a dedicated VLAN for my WAE's at both sites.I issue the 'sh tfo connection summ...
I have a WAAS deployment where there is a reasonable amount of traffic that goes through a firewall. Logically speaking the traffic goes from client to waas to remote waas then through a firewall to the server. I believe that the WAAS devices use I...
Hello,for some reason I cannot ping the VIP I configured on one ACE context.Here is a sample of the config:class-map match-any L4_kitrik 2 match virtual-address 10.0.0.1 anyclass-map type http loadbalance match-any L7_kitrik_URL 2 match http url .*...
Hello,In ANM 1.2 (it was the same in 1.1), how can I reset a user's password if he has forgotten his current password? I found no way to do this. The "change password" button on the login page requires the current password. As a user with the "ANM-Ad...
Hello. I have a rather simple configuration which works fine for HTTP but with SSL is a different matter. It's a 11501 one-armed running version sg0810106. The thing is pretty much like this. For HTTP: Starts browsing and after the NTLM authenticatio...
According to SurfControl is it possible to use a L4 - L7 load balancer to bear the 10000 per server limitation.Is the any know option to do this using the ACE module?
Though a Central Manager is configured to control two WAE between two buildings the two WAE are not handshaking therefore not sending data. Anyone seen this before and have a possible solution to try?Thanks in advance,Matt
Hi,We are interested about the ACE NAT performance. We would like to use this module just for the SNAT feature and only in bridge mode (to facilitate the ACE integration in the current network).the configuration could be similar to this one:--class-m...
Hi Sir,Below is an excerpt of CSM config:module ContentSwitchingModule 5! static nat 202.188.1.60 real 172.21.5.60 static nat 202.188.1.61 real 172.21.5.61! serverfarm SFARM1 nat server no nat client predictor leastconns real 172.21.5.60 inse...
Hello,I have a CSS11501S-k8 unit which we use to load-balance etc our web and file servers. Is it possible for me to configure it in a way such that only users with an IP address from a specific country are let in to the backend web/file servers and ...
I have two WAAS devices in my head office site doing load balancing and a number of remote sites each with a single site. Within the WAAS central manager web site if I look at Acceleration > topology for my load balancing WAAS devices I see a peer t...
Hi,my csm works in router mode, what happens if i create a vserver with an ip-address from a configured server vlan? Is the information switched instead of routed?Thanky in advance, Stephan
