09-29-2011 07:07 AM
Attempting to FTP a Wireshark capture file>
381796-4216-R#copy disk ftp 166.38.50.249 C:\ Columbus_WAAS.pcap JimsTest1_000$
Enter username for remote ftp server: 2ndlvl
Enter password for remote ftp server:
Initiating FTP upload...
Sending: USER 2ndlvl
3Com 3CDaemon FTP Server Version 2.0
User name ok, need password
Sending: PASS ********
User logged in
Sending: TYPE I
Type set to I.
Sending: PASV
Entering passive mode (166,38,50,249,14,92)
Sending: CWD C:\
C:\ : No such file or directory.
ftp changing to remote directory failed.
The FTP upload failed. Please try again.
Sent 0 bytes
=====================================================================
Destination FTP server gives a "Session closed by peer".
Any assistance is much appreciated!
09-29-2011 07:12 AM
Hi James,
Seems like issue in FTP command, see below
copy disk ftp 166.38.50.249 C:\ Columbus_WAAS.pcap JimsTest1_000$
here is how it should be
copy disk ftp 166.38.50.249 (FTP_Folder_on_FTP_Server) (Filename on remote FTP server) (Local filename)
So if FTP server folder is the root of FTP server then simply define "/" See below example
copy disk ftp 172.16.1.20 / UcliEvt.log UcliEvt.log
Enter username for remote ftp server:
Hope this helps.
09-29-2011 05:06 PM
Ahskhan,
Thanks so much for your quick response! Should FTP server be C:\temp or only temp? In my example, I was using root directory C:\
Thanks,
Jim Robinson
09-29-2011 05:06 PM
Ahskhan,
Disregard my last email, I didn't look at your example. Using it, I got it to work!
Thanks very much!
Jim Robinson
Verizon Business
Government Enterprise NOC (GENOC)
Office: 919-377-3983 (V966-3983)
jim.robinson@one.verizon.com
After Hours: USPSNOC, 866-783-4865 Opt 1 ask for Primary On-Call Engineer.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide