cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1243
Views
0
Helpful
4
Replies

WAAS WAE boot Fails

jvelasquez
Level 1
Level 1

Hello everybody,

After my WAE-7341-K9 rebooted, it had a boot problem.

At the begin, it showed this menu:

Press F1 for Setup

Press F2 for Diagnostics Controller started

Press F12 to select boot device

After I pressed F12, the WAE booted and run normaly. But in the boot logs, it showed me an error, this the output:

"

Controller monitor V5.2*0[11859], Controller kernel V5.2*0[11859]

Controller POST operation successful

Controller Memory Size: 256 MB

Controller WWN: 5005076B04056C9F

!!!CRITICAL ERROR: Memory retention failure, unflushed cache lost!!! "

Does somebody know which is the WAE boot sequence? or Does somebody know what means this error?

Thanks in advance for any comment.

José Luis

4 Replies 4

owillins
Level 6
Level 6

I understand the box is stuck in a loop and will not complete the boot up process.

It looks like the RAID controller physical cache has failed which is what would have caused your raid failure on the CM for this unit.

Hello Oscar,

I your comment: "..what would have caused your raid failure on the CM for this unit".

What do you mean with "CM" ?

Thanks.

CM: Central Manager

HTH

Daniel Laden
Level 4
Level 4

Looks like an issue with the array controller. Maybe the battery.

What is the 'show disk detail' and 'show disk tech' output.

-Dan

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: