02-15-2011 01:42 PM
First time booting an appliance and instead of booting to setup wizard, it hangs at db_grub_start.S, Decommpressing Linux...done, booting the kernal. at the bottom there is Kernel alive and kernel direct mapping tables up to 140000000 @ 800-e000
thanks in advance for the help.
Rich
Solved! Go to Solution.
02-15-2011 10:06 PM
Are you seeing this message after typing any particular option on the rescue cd menu options, or is this the message you get when you reboot the box with the rescue cd in cd-rom drive?
Which WAAS rescue-cd iso image are you running?
Regards
-Smita
02-15-2011 01:52 PM
Could you try using the WAAS recovery cd-rom and see if that helps?
Regards
-Smita
02-15-2011 02:28 PM
Thanks Smita,
When running the rescue CD, it got to: Uncompressing Linux...Ok, booting the kernel and hangs right there.
Looks like RMA time.
02-15-2011 02:33 PM
Are you using keyboard and monitor?
Could you try using the serial console
Regards
-Smita
02-15-2011 03:11 PM
Again Thanks Smita!
Fails in console: Booting processor 3/4 APIC 0x"hangs"
02-15-2011 10:06 PM
Are you seeing this message after typing any particular option on the rescue cd menu options, or is this the message you get when you reboot the box with the rescue cd in cd-rom drive?
Which WAAS rescue-cd iso image are you running?
Regards
-Smita
02-18-2011 02:31 PM
WAAS v4.2.3
It happened with just power cycling the appliance with the resuce CD in, never got to a point to hit option 7.
Recieving a next day RMA replacement today.
Thanks Smita
02-18-2011 02:35 PM
I do have another question.
What is the password recovery (login) for a Wae NM-502.
The Cisco refurbished card has a hostname and failed the admin.default credentials.
Thanks,
Rich
10-27-2011 06:13 AM
Write please actions on steps to solve this problem.
This error arises at the first boot WAE-674 without recovery disk
10-27-2011 02:02 PM
This very thing happened to us a couple years ago.
First, cisco thought it was a HDD failure and RMA'd those.
Then, they RMA'd the whole chassis.
End result, the guy was using a non-bootable disk to boot for the first time.
whups...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide