Application Networking

Hi everyone,I have implemented an ACE in One Arm mode, and I need to know if is possible to apply SNAT with the same IP used as VIP address.For example:class-map match-all port-80-redaccion  2 match virtual-address 200.10.1.42 tcp eq wwwinterface vla...

Hi Experts,I had some experience working with other optimizers which normally utilize tunnel tcehnology.  With this tunnel technology, branch and core optimizers are able to determine when to and not to optimize traffic (eg. there is no tunnel compre...

Im trying to find the actual back and forth packet transaction when i request a web site using a GSS.   I have been trying to locate the doc online but have been unable to do so. What I am trying to do is put together a presentation on the initial re...

I have deployed ACE in a portal architecture with two web servers in test environment. ACE does the SSL offloading. Users are experiencing 'Invalid Session' error 'randomly' while accessing various links on the web page. However, at other times same ...

Hi All , Is it possible to make one context and one arm mode and rest in normal-parvees

Hi,Just commisioned waas express for one of our sites recently and having issues with mainframe LPR printing. When the branch prints a 300 page report it stops halfway mark. Did anyone encounter this issue? It happens in all printer models but only w...

I have two site with connected through GRE Tunnel.  One end is ASR1000 and the other end is 7609.  And, I have WAE674 on each ends.  I also have a WAE as central manager to manage two WAEs.  I'm trying to figure out how to setup routers.Can I put "ip...

configured two reservers on ACEs,but need to create a serverfarm ,where all the traffic goes to only one rserver1,when this rserver1 fails completely or not in service the traffic need to be hitting rserver2. how can I configure on ACEs ,on CSS I kno...

Hi,In the datasheet of the WAE-674-K9 says that it supports (4-port network interface card (NIC) for inline Cisco WAAS deployment), but don't mention the HWIC-4ESW anywhere. Is it supported?Any help is much appreciated!

This may sound like a silly question but can I configure the rservers and the vip address on the same network? If so does anyone have a example config?NAT, policy, etc