09-23-2010 11:21 AM
Hello All,
- I'm having problems to copy an IOS from My FTP server installed on my notebok to the WAE-7341 with Ios version oe7341-4.0.17.14.
- I'm doing this command copy ftp disk 148.92.85.118 / WAAS-4.0.19.14-K9.bin WAAS-4.0.19.14-K9.bin and I was able to start the ftp download, but the download is timing out after 1/3 of the file transfer.
- Could someone tell me what i'm missing or doing wrong ?
The Image have 254 MB and as you can see i've copied only 179MB
USSMCWAGDRH001#dir
size time of last change name
-------------- ------------------------- -----------
1322 Mon Sep 20 17:28:38 2010 UcliEvt.log
179207920 Tue Sep 21 20:29:57 2010 WAAS-4.0.19.14-K9.bin <<<<<<<<<<<<<<<
4096 Thu Oct 22 21:40:00 2009 <DIR> actona
4096 Thu Oct 22 20:57:33 2009 <DIR> core_dir
4096 Mon Aug 2 10:26:38 2010 <DIR> crash
0 Fri Oct 23 01:27:00 2009 db-downgrade.log
4096 Thu Oct 22 20:57:32 2009 <DIR> downgrade
4096 Tue Sep 21 17:01:00 2010 <DIR> errorlog
4096 Mon Aug 2 10:27:33 2010 <DIR> logs
16384 Thu Oct 22 20:47:03 2009 <DIR> lost+found
4096 Wed Aug 11 03:26:01 2010 <DIR> sa
8192 Wed Sep 22 12:44:02 2010 <DIR> service_logs
350 Mon Aug 2 10:35:33 2010 setup_gen_config.txt
4096 Thu Oct 22 21:30:48 2009 <DIR> spool
154330 Wed Sep 22 12:44:07 2010 syslog.txt
4096 Thu Oct 22 20:57:13 2009 <DIR> var
508 Thu Oct 22 20:57:31 2009 wdd.sh.signed
USSMCWAGDRH001#
09-23-2010 11:30 AM
Hi,
This sounds like an issue with your FTP server timing out the connection. You may want to increase the timeout value on the FTP server, or you can enable FTP services on the WAE itself and upload to it.
On the CLI of the 7341 enter the config command inetd enable ftp.
Then from your PC command prompt FTP into the WAE with the admin account and put the file.
Example:
C:\>ftp 14.110.3.19
Connected to 14.110.3.19.
220-Welcome to the PDI WAAS Network. Please DO NOT make any permanent
220-changes without consulting mkorenba@cisco.com
220-Cisco Wide Area Application Engine
220-
220-
220 pdi-7341-19.pdiwaas.cisco.com FTP server (Version wu-2.7.0(1) Thu Jul 29
04:43 PDT 2010) ready.
User (14.110.3.19:(none)): admin
331 Password required for admin.
Password:
230-User admin logged in. Access restrictions apply.
230-Device is configured with a (well known) default username/password for ea
of initial configuration.
230 This default username/password should be changed in order to avoid unwant
access to the device.
ftp> bin
200 Type set to I.
ftp> hash
Hash mark printing On ftp: (2048 bytes/hash mark) .
ftp> prompt
Interactive mode Off .
ftp> mput *.bin
Then you can go back to the WAE and issue the install
Cheers,
Mike Korenbaum
Cisco WAAS PDI Help Desk
http://www.cisco.com/go/pdihelpdesk
P.S. if this answers your quesion, please mark it as answered with a 5.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide