If there is a logical subinterface configured under its physical interface (for example serial0/0/0.100 for routing), I should apply WCCP redirect (ip wccp 62 redirect in) to the logical interface, not the physical interface. Is that correct?Thanks
Hello All,- I'm having problems to copy an IOS from My FTP server installed on my notebok to the WAE-7341 with Ios version oe7341-4.0.17.14.- I'm doing this command
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
ms...
Here is the problem i am looking to resolve on my customer's network. Any idea on how to get the packet redirected to the three servers instead of to one server.When we shutdown the node 1, we are getting: :Page can not be found. Therefore there is n...
More info on the Slowloris attack here. http://www.funtoo.org/en/security/slowloris/ To mitigate this the following CSS config was given. I converted it to the ACE using the web based conversion tool on the ACE # CSScontent www_80_rule
vip...
Recently we changed how we did redirection from out branches to our datacenterBefore we did GRE-GRE Hash at the head end and the Same GRE -GRE and the branch end. We controlled what traffic was allowed to be rediretced by redirect list that pointed ...
I have a Customer Vale that is asking if the WAAS is able to perform video on demand accelaration as it use RTP over HTTP and if possible what acceleration level can we get ?
Hello,basically I want to static two-way nat 2 networks:network 192.168.1.x into 20.168.1.xnetwork 10.x.x.x into 20.x.x.xthis is my actual config:class-map match-all NAT_192.168.1.0_24 2 match source-address 192.168.1.0 255.255.255.0class-map match-...
Hi Guys,This post is as much a question as it is an observation.Typically we have a number of applications that use our CSM for load balancing and SSLM for encryption. In most cases the transition is seamless, in that there isn't much configuration ...
Hi everyone,I have a problem with passive FTP with fixed port range.I configured a ftp server with a fixed port range of 60000 - 60500 for the data channel.And the ace is configured with "inspect ftp" on policy of ftp-serverfarm.A tcpdump on server I...
Hello!WE are using the following probeprobe https ORAINFLA-1-443 interval 30 passdetect interval 10 ssl version SSLv3 request method get url https://192.168.29.114/index.html.html expect status 200 200The probe is functional but the following lo...
We're running ACE SM version A2(3.2) and have to create about 20 contexts with long names (50 characters). Which specific ACE resource would we need to watch in conjunction with these names?Thanks...
Hi All,I Have Cisco 4710 ACE, and configured TACACS on ACE for authentication and accounting. Configuration paste below.I am able to authenticate with ACS server 5.1 but not able to go in config mode of ACE 4710.Debug output attached.Need help on thi...
Hi,I am working in a project with WAAS. At moment is being did a POC for test of the WAAS´ features.So, my customer has in your environment, for sending and receiving of the emails, the OUTLOOK 2007 with encryption enable.In tests, saw that the confi...
Hi all,Currently i am having two radware Web Server Director Pro AS, Cookie Persistency (512 farms).While configuring VRRP through APsolute insite we got an error while copying configuration from master to backup.Kindly suggest the solution to proce...
