Dear Team,
I was trying to rescue a WAVE-274 from the rescue CD, I downloaded the ISO image 4.5.1 (waas-rescue-cdrom-4.5.1.2-k9),
and I followed the procedure: first #2 to format the Flash, then #3 to copy the cookie, then #5 to copy de sysimg from the
cdrom, and then #8 to copy the image (.img) to local disk.
But I have a problem when run the step 8, the WAVE-274 does not boot from flash:
The message said:
MODEL: OE274
FLASH: found, directory validated, version 1
COOKIE: valid
IMAGE: NONE
FLASHDEV: /dev/sdb
Installer Main Menu:
1. Configure Network
2. Manufacture flash
3. Install flash cookie
4. Install flash image from network
5. Install flash image from usb/cdrom
6. Install flash image from disk
7. Recreate RAID device (WAE-674/7341/7371/7541/7571/8541 only)
8. Wipe out disks and install .bin image
9. Exit (reboot)
Choice [0]: 3
Date= '08/10/12'
Cookie installed successfully.
MODEL: OE274
FLASH: found, directory validated, version 1
COOKIE: valid
IMAGE: NONE
FLASHDEV: /dev/sdb
Installer Main Menu:
1. Configure Network
2. Manufacture flash
3. Install flash cookie
4. Install flash image from network
5. Install flash image from usb/cdrom
6. Install flash image from disk
7. Recreate RAID device (WAE-674/7341/7371/7541/7571/8541 only)
8. Wipe out disks and install .bin image
9. Exit (reboot)
Choice [0]: 5
Using cd-rom device (/dev/scd0)
Please select an image from the following list:
1. waas-x86_64-4.5.1.2-k9.sysimg
2. Return to Main Menu
Image [1]: 1
Using image waas-x86_64-4.5.1.2-k9.sysimg
Read 26975232 byte image file
Existing version in flash: NONE
New version to install: 4.5.1.2
Proceed with flash write? [y]: y
.............................................................................................................................................................................................................. done.
Image was successfully written to flash.
unmount device (/dev/scd0)
MODEL: OE274
FLASH: found, directory validated, version 1
COOKIE: valid
IMAGE: 4.5.1.2
FLASHDEV: /dev/sdb
Installer Main Menu:
1. Configure Network
2. Manufacture flash
3. Install flash cookie
4. Install flash image from network
5. Install flash image from usb/cdrom
6. Install flash image from disk
7. Recreate RAID device (WAE-674/7341/7371/7541/7571/8541 only)
8. Wipe out disks and install .bin image
9. Exit (reboot)
Choice [0]: 8
Using cd-rom device (/dev/scd0)
Enter full URL of .bin image to install.
ftp://[user:pass@]ip_addr/path/to/file
http://[user:pass@]ip_addr/path/to/file
file:/local/path/to/to/file
URL for .bin image [file:/media/images/waas-universal-4.5.1.2-k9.bin]:
Continue? This will wipe out all disks! [n]: y
unmount device (/dev/scd0)
Scrogging sda done
Saving random seed...
dd: opening `/state/random-seed': No such file or directory
Missing system-use partitions; creating them on disk00
+ /sbin/sfdisk -f -uS /dev/sda
Found No SYSFS partition on /dev/sda, create it now.
Disk disk00: removing old disk partitions ...
Disk disk00: applying new partitioning scheme ...
Creating filesystem on device [/dev/sda1]...
e2fsck 1.38 (30-Jun-2005)
Mounting [/dev/sda1] at [/sw]
Mounted /dev/sda1 to /sw
Creating filesystem on device [/dev/sda2]...
e2fsck 1.38 (30-Jun-2005)
Mounting [/dev/sda2] at [/swstore]
Mounted /dev/sda2 to /swstore
Creating filesystem on device [/dev/sda3]...
e2fsck 1.38 (30-Jun-2005)
Mounting [/dev/sda3] at [/state]
Mounted /dev/sda3 to /state
Creating filesystem on device [/dev/sda6]...
e2fsck 1.38 (30-Jun-2005)
Mounting [/dev/sda6] at [/local/local1]
Mounted /dev/sda6 to /local/local1
Fail to open startup.config file.
Fail to open startup.config file.
Creating filesystem on device [/dev/data1/vbsp]...
Internal error: Unable to connect to dataserver
Disk encryption feature is disabled.
Internal error: Unable to connect to dataserver
Disk encryption feature is disabled.
Fail to open startup.config file.
Fail to open startup.config file.
Creating filesystem on device [/dev/data1/spool]...
Creating filesystem on device [/dev/data1/obj]...
Creating filesystem on device [/dev/data1/dre]...
Creating filesystem on device [/dev/data1/ackq]...
Creating filesystem on device [/dev/data1/plz]...
Fail to open startup.config file.
Fail to open startup.config file.
Running pre-disk-ready hooks...
connect: No such file or directory
connect: No such file or directory
connect: No such file or directory
Return value: -1
ssmgr: short read: 0 bytes
ssmgr: bad magic
ssmgr: op_open or media_open
ssmgr: short read: 0 bytes
ssmgr: bad magic
ssmgr: safe state area manufactured successfully.
Reading and installing image, it may take a few minutes, please wait...
Using cd-rom device (/dev/scd0)
remote size / mtime: 294921174 / 1321976995
Reclaiming unused flash safe state sectors ...SSMGR RETURNING: 4 (Success)
Done.
#####################################################################################
#####################################################################################
#####################################################################################
##########################
294921174 bytes transferred in 63.4 seconds (4.44 MBps)
Detected OE274
Installing phase3 bootloader...
Installing WAE 64-bit image.
Installing system image to flash... ...........................................................................................................................................
................................................................... done.
The new software will run after you reload.
Installing application components...[ac] [ap] [di] [jr] [kv] [li] [li] [me] [pe] [po] [to] [to] [un] [vm] [vm]
Running post-install hooks...
Syncing filesystems...
/ruby/bin/install-to-sw: DONE.
Successfully installed product image.
unmount device (/dev/scd0)
MODEL: OE274
FLASH: found, directory validated, version 1
COOKIE: valid
IMAGE: 4.5.1.b2
FLASHDEV: /dev/sdb
Installer Main Menu:
1. Configure Network
2. Manufacture flash
3. Install flash cookie
4. Install flash image from network
5. Install flash image from usb/cdrom
HP Remote Console 04.00age from disk
Remote Console display bypassed, System in video mode = 02 (50,18))
8. Wipe out disks and install .bin image (done)
9. Exit (reboot)
Choice [0]: 9
Reboot? [n]: y
Saving random seed...
1+0 records in
1+0 records out
unmounting /vbspace... done
unmounting /swstore... done
unmounting /sw... done
unmounting /state... done
unmounting /plz1... done
unmounting /obj1... done
unmounting /local/local1/spool... done
unmounting /local/local1... done
unmounting /dre1... done
unmounting /ackq1... done
Deactivating volume group... 0 logical volume(s) in volume group "data1" now active
done
Restarting system.
3072 MB
WAVE-274-K9 V01
BIOS Version vB1.05 08/01/08
For boot menu, press <F9> - Remote users: use Integrated Administrator
For setup, press <F10> - Remote console users press ESC+0
To boot from network, press <F12> - Remote users: use Integrated Administrator
Attempting Boot From CD-ROM
Attempting Boot From Hard Drive
I appreciate any information.
Thanks.
