06-21-2018 01:42 AM - edited 03-01-2019 09:35 AM
Hello,
I have a WAVE574 whose card PCI is broken.
Can i use any PCI EXPRESS 10 G CARD, or is something special in It?
Reading this document, any should be good.
Is there a list of compatible cards maybe?
Thanks a lot for the help.
Solved! Go to Solution.
10-29-2018 07:49 PM
The WAVE-574 can accommodate one optional 2-port Gigabit Ethernet inline network adapter or one optional 4-port Gigabit Ethernet inline network adapter.
For information about the features of the Cisco WAVE Inline Network Adapter and its cabling requirements, see Chapter 5, "WAVE Inline Network Adapter."
To install a PCI adapter in the riser-card assembly, follow these steps:
Please refer the link for more details:-
https://www.cisco.com/c/en/us/td/docs/app_ntwk_services/waas/wave/installation/574/guide/WAVE-574_HIG/574op2.html
10-29-2018 07:49 PM
The WAVE-574 can accommodate one optional 2-port Gigabit Ethernet inline network adapter or one optional 4-port Gigabit Ethernet inline network adapter.
For information about the features of the Cisco WAVE Inline Network Adapter and its cabling requirements, see Chapter 5, "WAVE Inline Network Adapter."
To install a PCI adapter in the riser-card assembly, follow these steps:
Please refer the link for more details:-
https://www.cisco.com/c/en/us/td/docs/app_ntwk_services/waas/wave/installation/574/guide/WAVE-574_HIG/574op2.html
10-30-2018 07:00 AM
Thanks a lot for the answer, i desume any PCI adapter may be good, there is not a spec brand recommened.
as long as 4 ports.
The WAVE appliance supports one optional 2-port Gigabit Ethernet inline network adapter or one optional 4-port Gigabit Ethernet inline network adapter. The inline network adapter is a full-height, three-quarter-length PCI Express network interface card that contains two or four independent Gigabit Ethernet ports. (See Figure 5-1.)
Figure 5-1 4-Port Inline Network Adapter
The Cisco WAVE inline network adapter provides an inline traffic interception capability for your appliance. When you configure the WAVE appliance for inline interception mode, you can set attributes to control which interfaces are to be used over which VLANs. By default, the adapter operates on all inline-capable interfaces and VLANs. You can configure the inline redirection feature using the WAAS CLI or the WAAS Central Manager GUI.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide