I am trying to configure traffic redirection for WAAS. from one side i have the WAE attached to a layer 2 switch and the default gateway is the router. by doing router on a stick. on the edge side, i have a WAE attched to a layer 3 switch where the SVI is the default gateway. so i have to configure the wccp on the switch. the topology is a hub and smoke topology and running OSPF with the spokes. configuring WCCP on a switch is different than a router and i want the traffic on the link where the WAE is installed. It is a little tricky.
Any suggestions kindly, check my diagram in the attachment
Pondering Automation has moved! It is now a part of the standard Cisco blogs in DevNet!
You can find the general blogs here: blogs.cisco.com
And you can find the newest pondering automation here: https://blogs.cisco.com/developer/ponderinga...
Here are some commonly asked questions and answers to help with your adoption of Cisco ACI solution. Subscribe to this post to stay up-to-date with the latest Q&A and recommended Ask the Experts (ATXs) sessions to attend.