05-14-2009 12:23 PM
I have a question pertaining to how policies work on vservers on Cisco's CSM.
If I configure a vserver with a policy and the policy has an access-list (client-group) mapped to it which directs traffic to a specific serverfarm however all reals in that serverfarm go into failed probe state, will the CSM still try to forward traffic using the policy or will it use the default serverfarm??
Thanks,
Tony
Solved! Go to Solution.
05-15-2009 12:49 AM
once we have a match on the policy, we will try to use it.
If all servers are down, then the connection is dropped.
You need to configure a backup serverfarm inside the policy.
Gilles.
05-14-2009 02:52 PM
Kindly find some sample configuration example below:
and
Cisco Content Switching Module
http://www.cisco.com/en/US/products/hw/modules/ps2706/prod_configuration_examples_list.html
Hope these will be good for your understanding.
If Possible Plz rate.
Kind Regards,
Sachin Garg
05-14-2009 03:39 PM
For configuring policies on CSM kindly refer to the link given below:
05-15-2009 12:49 AM
once we have a match on the policy, we will try to use it.
If all servers are down, then the connection is dropped.
You need to configure a backup serverfarm inside the policy.
Gilles.
05-15-2009 05:21 AM
Giles,
Thank you....that's what I was missing.
I'll add a backup serverfarm to each policy.
Tony
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide