cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2133
Views
5
Helpful
9
Comments
Qiming Huang
Level 1
Level 1

Company XYZ has multiple links terminate on HO (head office) router and it learns following routes through different protocol as shown below in routing table. 

 

   

  50.0.0.0/8 is variably subnetted, 4 subnets, 4 masks

B       50.50.50.0/30 [200/0] via 10.1.1.2, 00:06:12

D       50.50.50.0/28 [90/409600] via 20.1.1.2, 00:04:42, FastEthernet0/0

O       50.50.50.0/26 [110/65] via 30.1.1.2, 00:05:09, Serial0/1

S       50.50.50.0/24 is directly connected, 40.1.1.2 

 

Which route will be preferred by HO router to send packet to host 50.50.50.1

Options:

A) BGP with subnet 50.50.50.0/30

B) EIGRP with subnet 50.50.50.0/28

C) OSPF with subnet 50.50.50.0/26

D) Static route configure with subnet 50.50.50.0/24

 

9 Comments
aboothahirkp
Level 1
Level 1

D
 

Dan Lukes
VIP Alumni
VIP Alumni

A

50.50.50.0/30 is most specific record for 50.50.50.1 in route table

Routing protocols preferences are used only when more than one equal-specific routes are placed in route table

 

gaston.benitez
Level 1
Level 1

- D.

A route that has a directly connected interface is better than a learned route.

it
Level 1
Level 1

STATIC ROUTE IS MORE PREFERED.

HugoAmaro
Level 1
Level 1
A) BGP with subnet 50.50.50.0/30
 
A) BGP with subnet 50.50.50.0/30
it
Level 1
Level 1

The one with a lower Administrative Distance is most preferred . Since in this case STATIC ROUTE.

sanjeev mahor
Level 1
Level 1

D

Kyaw Phyo Thet
Level 1
Level 1

D) Static route configure 

mdiciero1
Level 1
Level 1

D

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: