As title.
I have tried to press reset button on front of device, but the device still doesn't work for reset.
Next I was looking for the others articles about this issue and known its maybe a hardware issue.
Due to devices is out of warranty date, so i can't submit TAC support.
Is any suggestion for this issue?
Thanks.
Following is error MSG from console.
--
**************************************************
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.3.5.06 Built 21-Jul-2013 15:12:10
Networking device with Marvell ARM CPU core. 128 MByte SDRAM.
I-Cache 16 KB. D-Cache 16 KB. L2 Cache 256 KB. Cache Enabled.
MAC Address : 2c:ab:
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
Decompressing SW from image-2
100%
OK
Running from RAM...
GPIO ID is 6
Module type is 18
Device ID 0xe75a11ab
*********************************************************************
*** Running SW Ver. 1.4.11.2 Date 26-Sep-2019 Time 20:04:30 ***
*********************************************************************
HW version is V05
Base Mac address is: 2c:ab:eb:25:f4:c1
Dram size is : 128M bytes
Dram first block size is : 100352K bytes
Dram first PTR is : 0x1A00000
Dram second block size is : 4096K bytes
Dram second PTR is : 0x7C00000
Flash size is: 16M
......................................................................................................................................................................................................................................................................................................................................................................................
26-Sep-2019 20:04:34 %CDB-I-LOADCONFIG: Loading running configuration.
26-Sep-2019 20:04:36 %CDB-I-LOADCONFIG: Loading startup configuration.
Device configuration:
Slot 1 - SG300-10
Device 0: GT_98DX3033B (AlleyCat2)
------------------------------------
-- Unit Standalone --
------------------------------------
RSFLEG_read: offset=720657, size=37, file_id.file_index=5, f_size=19656026-Sep-2019 20:04:46 %SYSLOG-F-OSFATAL: RSFLEG_read: wrong input parameters !!!
***** FATAL ERROR *****
Reporting Task: ROOT.
Software Version: 1.4.11.2 (date 26-Sep-2019 time 20:04:30)
0x16aee8
0x16b44c
0x16700c
0x77e970
0x698af4
0x235520
0x239a94
0x23b850
0x23baec
0x23c614
0x24a870
0x215588
0x33a63c
0x1f7338
0x1223f0
**************************************************
***************** SYSTEM RESET *****************
**************************************************
--