I have a question, when you say "after"? Is it after some minutes, days or months, or more time?thanks!
Forum Posts
Hello,The documentation for the Cisco Jabber TC_TIMELOG table says that the direction field can be E for Enter, L for Leave.However I have seen the direction being N.What does N mean?It looks synonymous with E, but, it's not documented.The documentat...
I am still having same error after upgrading to Version 12.7.1.51081 Build 301081.
Hi is it possible to download the firmware proposed in the case?
The workaround shows clearing the IKEv1 SA. Does this bug also affect IKEv2 connections, or is it limited to IKEv1?
Is there anyone has this error for overlapping prefix because we've this error/alarm but I think everything is going fine.Another thing for l3Out Subnets we cannot use the same prefix under different L3OUTS this point is cleared but what I confused i...
We're having a Cisco 9200L-48P-4X with IOSX in Version 16.12.1.When it starts there are multiple entries like the following: *Oct 7 06:31:26.911: %PMAN-3-PROC_EMPTY_EXEC_FILE: Switch 1 R0/0: pvp: Empty executable used for process run_ioxn_ secure_dir...
There isn't a patch out for this yet right? ISE 2.4 Patch 8 I think is version 2.4(0.904) correct? I'm getting that from the bundle name: ise-patchbundle-2.4.0.357-Patch8-19041200.SPA.x86_64.tar.gz, but I don't know since it's kind of right in middle...
Hi, I'm facing the same issue with my CES SMA which is on 12.0.0-478.Is there a solution? All mails will be delivered, so the whole quarantine process won't work! RegardsSteffen
So looking at the debug below. Every time Radio 1 and 0 show, "send OFFCHAN req" they are going off channel per this bug? Mar 15 12:59:58 kernel: [*03/15/2019 12:59:58.0914] DOT11_DRV[1]: Rad: 1 chan: 60 | nf: 97 Mar 15 13:03:25 kernel: [*03/15/2019...
Just curious here, has anyone that is currently utilizing firmware load 12.6.1 for the 88xx model IP Phone ran into this bug? I am vetting firmware in my lab and have not reproduced this issue. Per the bug details, it is hard to reproduce so I am not...
I'm currently running 6.3.0.3 on one of my sensors that is experiencing this issue. Usage racked up during an upgrade attempt to 6.4.0. Update failed and started producing the high Unmanaged Disk usage on /Volume. I opened a ticket and cleared down t...
Hi,As per the CISCO-PRODUCTS-MIB the OID 1.3.6.1.4.1.9.1.2664 should show up the Value "Virtual Stack of Cisco Catalyst 9400". https://github.com/librenms/librenms/blob/master/mibs/CISCO-PRODUCTS-MIBOn doing an SNMPWalk on one of the 9410R switches, ...
We have a 4351 router that is generating this error yet has the recommended fix. global command: no ip cef accounting
This happened to us as well. We fixed it by removing the respective security zone from the Network discovery policy where it was used.
