Cisco Bug Discussions

Has anyone found a way around this as yet as I have left a hole in my firewall because of this. If you make a mistake on a 1-to-1 NAT like I did (albeit because of this bug) it can be a big issue.

We encountered this bug when upgrading a Nexus5596UP from 7.1.4.N1.1 to 7.3.3.N1.1. Side effects were serious. How can we avoid this bug ?

I had this error in the logs of some of my 3650 switches that was running Everest 16.6.4. I upgraded to 16.6.4a to remedy high cpu from SISF process while running DHCP snooping.  The upgraded fixed the SISF process but the error remains in my logs. T...

I have a similar issue with this bug: PID:WS-C2960S-24TS-L software:Version 12.2(55)SE3 、Version 15.2(2)E9 they will silense reload after a few days,and dispaly the "System returned to ROM by power-on" by "show version" command. eg: -----------------...

This Bug also exists in 155-3.S5"bootflash:/asr1001x-universalk9.03.16.05.S.155-3.S5-ext.SPA.bin"Source Time Severity Description [Index]------ ------ -------- -------------------Power Supply Module 0 Feb 21 2019 12:53:32 CRITICAL Power Supply Failur...

Anyone using Anyconnect 4.x w/ Two-factor Authentication experiencing this bug?   AnyConnect fails to pre-fill secondary username with dual authentication https://bst.cloudapps.cisco.com/bugsearch/bug/CSCuv45057/?rfs=iqvred   Kevin

Any updates on this basic feature request?  I have an ASAv rebooting itself according to the Azure logs.  Crashinfo is empty.  Syslogs capture nothing.  No idea why this is happening.

So can this issue resolved with updating the patch from 12 to 13?

Any activity on this enhancement request? Anything in the roadmap already?   I have a few customers who cling to their MCUs despite having a fully deployed & up-to date CMS/CMM solutions in their environment. Losing Codian's webUI capabilities, namel...

while we upgrade  lost the access - not able to login local and TACAS password. 

Hi! Does anyone have a clue of a release that will fix this issue? We need it badly :(

After trying to upgrade the FMC from 6.0.1 to 6.1.0, the task status has shown that the upgrade is stopped at 10% and the login session has terminated. when trying to login I can't and it gives me the following " Unable to authorize access. If you co...

We are currently experiencing this problem. Resolved previously with a root patch and TAC guidance to remove unwanted/unnecessary files. This time around TAC supporting, but unwilling to provide root patch, and requesting we perform reinstall which i...

Dear community,   In my case i was updating from 3.2(3d) to 4.0(1b) and took 1.5Hours in order to pass this phase.   HXAF240c M5SX   Kind Regards PF

What release will have support for SNMPv3? Target date of ?