Cisco Bug Discussions

The advisory list MXPs as vulnerable, but I couldn´t find any other info regarding MXP (that runs F software) https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20170607-tele TelePresence System Profile MXP Series: TelePr...

Hi,       I am observing the TPLUS process getting spike in Cisco 7206(NPEG1) router. Kindly provide the suggestion. IOS: c7200-adventerprisek9-mz.151-4.M4.bin   CPU utilization for five seconds: 99%/12%; one minute: 99%; five minutes: 99% PID Runtim...

I have a brand new ASA 5515-x. I restore de config from my old 5510. I want to activate my license from my smart account. So, when use the command license smart enable, I have an invalid input detected. Why the command License is not available. Thank...

I have a cisco ASR1001-X with software /asr1001x-universalk9.03.17.01.S.156-1.S1-std.SPA.bin "The current release is affected by the bug CSCup53658, qinq subinterface stats do not work on Port Channel, I can not understand in which release the bug h...

if no action is taken, such as deleting those .bin files or upgrade to 16.5.1a, what will happen to the switch?

Getting the below error while configuring dynamic NAT on SVI. 2017 May 23 14:08:08 <Hostname> %AFM-3-AFM_VERIFY_FAIL: Access control policy modification on vlan 50 failed 2017 May 23 14:08:08 <Hostname>last message repeated 7 times 2017 May 23 14:08:...

For 11.5 version, it states it is fixed on 11.5(1.13038.1). However, from the CCO download site, CUCM only has 11.5.1.12900-21 "i.e. 11.5(1)SU2". Anyone knows when 11.5(1.13038.1) will be launched?? thanks.

This seems like a big step backwards moving from CME to CUCM when blind transfer return is not even an option on CUCM.  Please consider this feature. (Agree that attendant console software, if a work around, is an issue with "rds/terminal server" en...

Hello, I am wondering if the version 6.2.6 on N7Ks is vulnerable? According to this link, the first fixed release is 6.2.16 and hence, 6.2.6 is vulnerable: https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20161005-nxaa...

Hi All Is this bug in 8.2.151.0 really solved? I still have completely wrong client count numbers on PI 3.1 P6 . ThanksPatrick

According to the following link, it states the issue has been fixed. However my RV220w is on firmware 1.0.7.2 and still experiencing this issue. Anyone else have a similar issue? Any suggestions on how to go about resolving this?  https://bst.cloudap...

I got the error message on version 03.03.04SE.

hi all, i've setup new ironport licenses, everything is fine except for "bounce verification" that is in a "dormant" state. Can you please help me? Thanks

Hi, I have install and configured some switches with software versión 3.6.6E that is now suggested Cisco versión and data from 23-DEC-2016 What is the recommended version for switches affected with this bug? 3.7(3)E data from 15-JAN-2016 and 3.6(4...