Cisco Bug Discussions

I have the same issue with 8945 phones. But its not an network issue. I am running the beta code on a group of phones and still have the issue with the phone locking up. Any news on a new software to try to fix this issue? 

I have downloaded ASDM 7.7.1-150 still not fixed! where can I get the fixed version from?

the not displaying AnyConnect connections in ASDM was supposed to have been fixed by ASDM-771-150 still not fixed. running ASA 9.5.3(2) in multi context mode. When will this bug be fixed?

Has anyone ever seen a client device blacklist/exclude on the client side vs. just retrying like most clients?

Got burnt by this bug this past weekend when upgrading the IOS to 3.6.4 on my 3850 Stacks. Luckily only one of the 32 switches needed to be replaced.

The Asnyc version above is also affected by this bug.

A memory leak bug, with the work around being to disable macros entirely? huh? Anyone know why cisco wouldn't fix this bug? This has been affecting us for months now. We have to reboot the stack weekly which is very annoying. Otherwise the console is...

What is the status of this bug? Does this mean that Cisco UCS with VIC cannot work with VVOLS? Thanks, Ravi

Hi All, Just a heads up that I had this bug occur in our environment due to CE8.3.X. Seems as though the default setting for the H323 Encryption KeySize is now 'Min1024bit' as opposed to previously 'Max1024bit'. Cheers, Rich 

I still faced this issue on 3850-24XS-S running ios-xe version 03.07.04E .

Hello, We found the Jabber for iOS and Android clients can work in the Internet with custom HTML tabs using Javascript and dynamic html. Please consider the Jabber for Windows to support MRA. Thanks, Andy    

I looks like the bug description is not completely. Is there any way to see the full bug description ? thanks!

Not real familiar with the Cisco Bug process, but this bug now shows as fixed.  That would imply to me I can apply said fix to my appliances.  However I see no new software to download?  Does this only indicate they have the code to fix it but it is ...

Cisco 3945 router interface status "GigabitEthernet0/0 is reset, line protocol is down  "

Hi, I just need to know that how could I restore this issue. In Cisco's Bug Search,as of now,therer's not enough information. So,Does anyone take care of this issue? Symptom:When port-channel interface goes up by reaching min-link, lacp port is some...