Cisco Bug Discussions

hi I'm just wondering about command 'physleep enable' in this case very hard to find that reference all. I couldn't .. plz let me know what this command role if I use. thx.

There is still no workaround for this issue? I am experiencing the same problem.

  Hi - I am looking for some clarification. In the bulletin it states "only observed on ....... Cisco IOS Software release 15.2(1)."  But the known affected release is 15.0(1)EX. Is that confusing to anyone else?

Hello,yesterday I had same issue on c3750-48PS-E with 12.2(55)SE4.Single SFP uplink was connected, but no data over it - OSPF change to DOWN => no connectivityChange of SFP transiever with no result.After switch reload was all OKThx

Dear All,While connecting to a bunch of CISCO devices using OpenSSH 6.4p1, I noticed that it fails.Please find the debug log attached:

RP don't apper any alarm message when log in to it directly through consol ,even when change cosol cable or the software

We would also like to see a minimize option and /or something that allows to drag the window around. Some user complained that they cannot easily access content behind the popup.Steafn

Need to block TOR and other anonymizing applications".

30442 is not a duplicate of this bug - at all.30442 was in regards to a WiSM-1 module. 

Does this affect the Cisco Nexus 7000 as well. I have a similar case where I need to clear routes and things work. Am running  5.2.3a on Nexus 7000's Any information in this regards would be useful.

We upgraded an MX200 yesterday to 7.0.1.  As soon as the Cico Touch was used the device immediately went back into maintenance mode.  Therefore it appears that this issue has not been corrected in 7.0.0

Estavamos com problema de transmissão de vídeo dpo TP Server para o 9971, via TMS.Aplicamos este firmware e o problema foi resolvido.Att,Thiago RochaAnalista de Redes na PromonLogicalis

     I updated my ASA to 9.1.4 and used the newest AnyConnect client 3.1.05152. No longer having RECONNECTS on the Client after 1 minute.     

In bug CSCtn53730 in "Known Affected Releases" section set only one version: 15.1(3)T.But in oval content http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20130925-nat/oval/cisco-sa-20130925-nat_401.xmlset 19 versions.wha...