Cisco Bug Discussions

Is this fix applied to any of the other releases (8.3 and 8.4) ?This command is not available on 8.3(1) in our environment.

Seems that the issue (CSCvz76478 - No Audio and Video in Safari 15.0 ( iOS 15) for webapp calls) is fixed with iOS 15.3, can anyone confirm this?

I am using 5520 WLC and 3802 model  APs  with software version 8.5.151.0 users facing issue on certificate based SSID due to Bug CsCvp72309 , I planned to move on version 8.10.162 and 8.10.151.0 but unfortunately these versions having impacting Bug t...

Has anyone upgraded to one of the listed "Fixed" images that can confirm that the new image disables the SLU License ACK requirement for SIP Enable phones on a CME router? I can't find anything in the release notes that indicate the bug was fixed.htt...

I am consistently getting messages on FMC "Frequent drain of Connection Events."  FTD model; 2110 FMC: IPv6 Address DisabledModel Cisco Firepower Management Center 2500Versions: Software 6.2.3not sure how to get rid of this message ?

I was adding a new AP3802I and it would not get IP from DHCP. Google search revealed the old Cisco bug (which may or may not be the case). However, log records were identical to this bug CSCvi14641. I was able to resolve the issue after assigning a s...

The ASDM version 7.16.1.150 and 7.17.1 still have bug 

I have the error code F0411 on all my N9K-C93180YC-FXIt seems to be a bug rather than a hardware problem.it seems CSCvp48462Because really there is no error. The status of the power supplies is ok and the lights are green.Power Actual TotalSupply Mod...

how to summarize different Network 10.194.2.0/2710.194.2.48/2610.194.2.32/2810.194.2.64/2510.194.2.128/25 

RP/0/RP0/CPU0:#show install requestFri Jan 21 06:03:39.868 UTCUser request: install package replace /harddisk:/IOSXR1/ncs540l-x64-7.4.1.isoOperation ID: 7.1.1State: Failure since 2022-01-19 17:30:04 UTCInternal error on 1 node. First error: 0/RP0/CPU...

Bug CSCvr54798 Is there anything in the roadmap on this matter? We need dynamic split tunneling to work for iOS devices as well.

We recently upgraded SMA to version 14.1.0 build 227 and users were prompted for credentials after the upgrade. We then upgraded SMA to version 14.1.0 build 239, but the users are still prompted for credentials.

Hello, I have been encountering this issue loosely matching the bug description. We have hundreds of AP's deployed and from time-to-time they "need" a reboot and one of the issues encountered is that the clients never receive a DHCP address from that...

Hi all, Where can I download fineese12.6.2.9000.220?