Copy run start fails on Nexus 9K - 93180YC-FX

[welinton.coloma2]

Hello,

I ran into an issue on one of our N9Ks when saving changes to running configuration; this is the error I get:

%SYSMGR-3-CFGWRITE_ABORTED: Configuration copy aborted

%SYSMGR-3-CFGWRITE_FAILED: Configuration copy failed (error-id 0x401E0000)

I did find similar issues affecting 7.0(3)I7(2) version. No known fixed results for NXOS version 9.x.x though.

Does anyone in this channel might have encounter this issue and was able to resolve it? 

[balaji.bandi]

i do not see anywhere these bug reported in 9.2 to 9.3.X which means it was fixed.

even 7.X  also fixed if you like to upgrade to 7.X version

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/release/notes/70374_nxos_rn.html

[welinton.coloma2]

Thanks for the reply B!
I found the same information when I did some earlier research. Nothing for version 9.2.3 and 9.3.3.
I don’t have the details of how or when this issue started on our switch.
However, it is happening on our 9K with 9.3.3 NXOS version.

What I’ve noticed is that, some changes made to the running configuration DO save.

[balaji.bandi]

then it must be reported to TAC to open a case as it was not resolved.