11-29-2012 11:52 AM - edited 03-20-2019 07:59 PM
CISCO2911/K9
Router was running c2900-universalk9-mz.SPA.151-4.M2.bin
Upgraded IOS to c2900-universalk9-mz.SPA.151-4.M5.bin
There is no RPS installed, and we are getting SNMP alarms that the RPS has failed.
The power system is working fine. An incorrect alarm is being sent, but not sure why it is an alarm for a redundant power supply failure since there is not one installed.
11-29-2012 12:20 PM
Hi Ryan,
That sounds like a new bug. Can you include the exact message being generated by the router? That will help us identify if it is a known bug, or a new one. If a new one, I would ask that you open a TAC case so that we can further isolate the issue and file a bug on it to ensure it gets fixed quickly.
Thanks in advance,
David.
01-21-2013 11:51 AM
Had same issue , cisco 2901 upgraded to c2900-universalk9-mz.SPA.151-4.M5.bin configured CME and after restart it din come back , tried everything possible i was finally able to get it back but again after completing the configuration I restarted and nothing came back . Finally I raised RMA.
There is no way to goto Rommon even.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide