Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
1539
Views
0
Helpful
2
Replies

CSCtg72652

rya308878
Level 1
Level 1

‎11-29-2012 11:52 AM - edited ‎03-20-2019 07:59 PM

CISCO2911/K9
Router was running c2900-universalk9-mz.SPA.151-4.M2.bin

Upgraded IOS to c2900-universalk9-mz.SPA.151-4.M5.bin
There is no RPS installed, and we are getting SNMP alarms that the RPS has failed.

The power system is working fine. An incorrect alarm is being sent, but not sure why it is an alarm for a redundant power supply failure since there is not one installed.

Labels:
0 Helpful
2 Replies 2

David White
Cisco Employee
Cisco Employee

‎11-29-2012 12:20 PM

Hi Ryan,

That sounds like a new bug.  Can you include the exact message being generated by the router?  That will help us identify if it is a known bug, or a new one.  If a new one, I would ask that you open a TAC case so that we can further isolate the issue and file a bug on it to ensure it gets fixed quickly.

Thanks in advance,

David.

0 Helpful

Ahmed Hassan
Level 1
Level 1

‎01-21-2013 11:51 AM

Had same issue , cisco 2901 upgraded to  c2900-universalk9-mz.SPA.151-4.M5.bin  configured CME and after restart it din come back , tried everything possible i was finally able to get it back but again after completing the configuration I restarted and nothing came back . Finally I raised RMA.

There is no way to goto Rommon even.

0 Helpful
Customers Also Viewed These Support Documents