10-23-2017 03:54 PM - edited 03-20-2019 09:39 PM
HI,
We are seeing a similar issue with Strongswan and CISCO ASA 9.7(1)4. Can someone please confirm if this is bug effects 9.7(1)4?
Thanks
Prashanth
01-12-2018 12:11 PM
I'm having the same issue with getting a Fortinet to connect to ASA.
If I protect 1 network then the VPN connects, but if I have multiple, it fails
01-24-2018 08:31 AM
I got mine working, my issue ended up being a NAT configuration issue on the ASA side. Once I resolved the issue, the tunnel came up and stayed up
01-24-2018 11:55 PM
Many thanks for that hint. In any circumstance, my ASA was using the same NAT-IP for two hosts. Very strange behaviour.
I'm using object NAT. The (right!) NAT object was used at the NAT section of the host.
But in the object overview i saw, that it was the IP of another NAT object. Creepy! :-)
01-26-2018 10:43 AM
Make sure to create a NAT entry to NOT NAT any traffic from your "protected Network" to the remote Network. The order of the NAT entries is important also (that was my problem)
01-24-2018 07:05 AM
Having exactly the same issue with Barracuda NG and ASA 9.7(1)15.
Can't understand, that Severity of this bug is "Enhancement".
06-21-2018 12:14 AM
I have this problem also with Cisco IOS 15.4 on 800 series with strongswan as the remote end.
08-15-2018 08:55 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide