09-19-2017 07:30 AM - edited 03-20-2019 09:32 PM
I wanted to start a discussion on this bug. The bug report has 3850's as the platform affected and software 3.7.0. I am running 3.6.6 on a 3650 and I am seeing these errors. In my case when the IMAX error occurs, the AP reboots causing it to disjoin from the controller. I have approximately 1300 AP's that are the same model;2702i. This happens sporadically across my 23 campus locations and sometimes the AP's are the same and sometimes not. I have a TAC case opened that involves this and AP's disjoining by being told to reboot from the controller, at least that is what TAC believes. They have suggested that I upgrade the wireless controllers. I have two 8510's currently running the last recommended software, 8.2.160. Once I establish a maintenance window I will be upgrading to 8.3.122. This is supposed to fix the AP reboot from controller and I am hopeful it will fix the IMAX errors too. I hope this information helps others out there that may have the same issue and are wondering what is going on. I will update the status when the upgrade is done.
Solved! Go to Solution.
06-22-2018 10:21 AM
OK to get some closure on this thread I will provide the final update. Upgrading the switches to Denali 16.3.6 did solve my issue. I am not suggesting to go to this version if you have the issue and your version is 3.6.6. I was upgrading to Denali anyway so it worked out. If you are on 3.6.6 and do not want to change platforms then I would suggest to wait on the 3.6.9 release as Klaus mentioned.
03-07-2018 01:46 AM
03-07-2018 06:31 AM
No the upgrade didn't solve the IMAX error. TAC is engaging a switching engineer for troubleshooting. Funny thing is that I have 1200+ AP's out there and it is the same AP's that are drawing this error.
03-07-2018 06:35 AM
03-27-2018 06:15 AM
04-09-2018 04:38 AM
Hi Thomas,
Our case went into a similar direction: We updated to 3.6.8 for testing purposes butPoE ports still went down. The engineer is now suspecting CSCvd46008 as reason for that. We got a huge list of commands to collect outputs *sigh*.
I keep you posted!
05-31-2018 12:30 AM
Hi Thomas,
Our case is now going to an end after we delivered huge amounts of output and got engineering involved. The fix will be implemented in 3.6.9E and Polaris images 16.6.4 and 16.3.7. Out of those the one with the nearest release date (according to TAC) is 16.6.4 which should be out by the end of June/ start of July.
Hooray!
05-31-2018 06:23 AM
That's great klaus! I recently upgraded all my switches to Denali 16.3.6. I am in monitoring currently but so far so good.
06-22-2018 10:21 AM
OK to get some closure on this thread I will provide the final update. Upgrading the switches to Denali 16.3.6 did solve my issue. I am not suggesting to go to this version if you have the issue and your version is 3.6.6. I was upgrading to Denali anyway so it worked out. If you are on 3.6.6 and do not want to change platforms then I would suggest to wait on the 3.6.9 release as Klaus mentioned.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide