CSCvb74390

[toshi5301]

Hi,

I just need to know that how could I restore this issue.

In Cisco's Bug Search,as of now,therer's not enough information.

So,Does anyone take care of this issue?

Symptom:
When port-channel interface goes up by reaching min-link, lacp port is sometimes flapped.

Conditions:
This symptom maybe observed when lacp min-link is configured and the port-channel interface goes up.

Workaround:
none

Regards

Toshi

[Palani Mohan]

Dear Toshi san

Here is additional information.

At one end, it as a Nexus 7000 box running 7.0(3)I2(2a). Other end is a Nexus/9000 running APIC. Problem is seen with  1.3(1g) and 2.1(1h)

Uses vpc and lacp min-link feature.

Each leaf switch is configured to have 2 port-channel interface. Opposite switch(n7k) is configured port-channel at 4 interfaces.

When you issue 'shut' at n7k interface, one interface went down and peer port went down (suspended due to min-link).

After issuing 'no shut', opposite port on leaf switch went up. However, peer port was sometimes flapped.

Current status of this bug is that it is Resolved.

I hope this helps .... Palani

[toshi5301]

Hi,Palani

I'm so sorry for delayed my response,and much thanks to your great support!!

Regards

Toshi