02-28-2020 11:47 AM
16.3.7 also having same problem Feb 28 19:22:25: %PLATFORM-4-ELEMENT_WARNING:Switch 1 R0/0: smand: 1/RP/0: Used Memory value 94% exceeds warning level 90%
06-10-2020 06:48 AM
Jun 10 15:39:23.745: %PLATFORM-3-ELEMENT_CRITICAL: Switch 2 R0/0: smand: 2/RP/0: Used Memory value 96% exceeds critical level 95%
We updated our stack at the beginning of 2020 to 16.9.4 and still have this issue.
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
1 34 WS-C3850-24XS 16.9.4 CAT3K_CAA-UNIVERSALK9 INSTALL
* 2 34 WS-C3850-24XS 16.9.4 CAT3K_CAA-UNIVERSALK9 INSTALL
3 34 WS-C3850-24XS 16.9.4 CAT3K_CAA-UNIVERSALK9 INSTALL
4 34 WS-C3850-24XS 16.9.4 CAT3K_CAA-UNIVERSALK9 INSTALL
Which version is a 100 % fixed one?
02-18-2022 01:53 PM
Hello.
I have this issue!
Can you please tell me what you have done to remedy your situation?
Have you cleared the RAM with a reboot? If so, how long until your RAM was 90% full?
Thank you!
Mic Jameson
CCNP Enterprise
02-18-2022 02:43 PM
Hi,
reboooting resolves the issue for a couple of days. We updated to another version, but I can not tell you which one at the moment cause I am writing from my mobile.
02-19-2022 02:20 AM
Thank you for your reply.
I would greatly appreciate if you can inform me on the results of your update, as I need to solve a very similar issue on a production critical switch, and my superiors are keeping an eye on me with this.
02-19-2022 05:01 AM
Hi MicJameson,
I checked our current running version:
DaCore01#sh version
Cisco IOS XE Software, Version 16.12.03a
Running this version fixed the problem.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide