cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
523
Views
5
Helpful
4
Replies
Highlighted
Beginner

IOS-XR failed to initiate traceroute command

 

I am trying to initiate "traceroute" command on Cisco ASR 9010 and 9912, but it failed to initiate and show no results.
In fact, IOS-XR stuck with initiating the command.

 

Platform: ASR 9010 , ASR 9912
IOS-XR Version: 6.2.3 , 6.4.2

 

Please find the attached file.

 

Note: sometimes works correctly (most of the time not working correctly).

 

 

4 REPLIES 4
Highlighted
Cisco Employee

Hello,

 

from below I'd say it depends on more factors than visible in this post.

 

Kind Regards,


Andreas

 


RP/0/RSP0/CPU0:ASR9K-2#traceroute 192.168.224.80 source lo0
Fri Feb 22 15:46:53.836 CET

Type escape sequence to abort.
Tracing the route to 192.168.224.80

1 *
10.10.10.65 3 msec
10.10.10.61 0 msec
RP/0/RSP0/CPU0:ASR9K-2#sh ver brie | i Cisco IOS XR Softwar
Fri Feb 22 15:47:12.754 CET
Cisco IOS XR Software, Version 6.2.3[Default]
RP/0/RSP0/CPU0:ASR9K-2#

Highlighted

 

Hi Andreas,

How can verify or debug the traceroute process?

 

This bug really annoying

 

Regards,

Ali

Highlighted

Hello Ali,

you needed to check for Route/VRF/Interface/CEF/MPLS on how the system should process it.

Kind Regards,

Andreas

 

 

Highlighted

@Andreas Kalb 

At least we should see this text "Type escape sequence to abort."

 

Type escape sequence to abort.
Tracing the route to X.X.X.X

Content for Community-Ad