cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Cisco Community Designated VIP Class of 2020

412
Views
5
Helpful
4
Replies
Beginner

IOS-XR failed to initiate traceroute command

 

I am trying to initiate "traceroute" command on Cisco ASR 9010 and 9912, but it failed to initiate and show no results.
In fact, IOS-XR stuck with initiating the command.

 

Platform: ASR 9010 , ASR 9912
IOS-XR Version: 6.2.3 , 6.4.2

 

Please find the attached file.

 

Note: sometimes works correctly (most of the time not working correctly).

 

 

Everyone's tags (2)
4 REPLIES 4
Cisco Employee

Re: IOS-XR failed to initiate traceroute command

Hello,

 

from below I'd say it depends on more factors than visible in this post.

 

Kind Regards,


Andreas

 


RP/0/RSP0/CPU0:ASR9K-2#traceroute 192.168.224.80 source lo0
Fri Feb 22 15:46:53.836 CET

Type escape sequence to abort.
Tracing the route to 192.168.224.80

1 *
10.10.10.65 3 msec
10.10.10.61 0 msec
RP/0/RSP0/CPU0:ASR9K-2#sh ver brie | i Cisco IOS XR Softwar
Fri Feb 22 15:47:12.754 CET
Cisco IOS XR Software, Version 6.2.3[Default]
RP/0/RSP0/CPU0:ASR9K-2#

Beginner

Re: IOS-XR failed to initiate traceroute command

 

Hi Andreas,

How can verify or debug the traceroute process?

 

This bug really annoying

 

Regards,

Ali

Cisco Employee

Re: IOS-XR failed to initiate traceroute command

Hello Ali,

you needed to check for Route/VRF/Interface/CEF/MPLS on how the system should process it.

Kind Regards,

Andreas

 

 

Beginner

Re: IOS-XR failed to initiate traceroute command

@Andreas Kalb 

At least we should see this text "Type escape sequence to abort."

 

Type escape sequence to abort.
Tracing the route to X.X.X.X

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here