How should you proceed if you get this messeges in a cat36 switch ? Is there a workaround ?
Forum Posts
We have some CUCM/CUC on 10.5 and some are on 11.5 , the backup intermittently fails with ERROR: Unable to transfer the tar file over SFTP channel as currently configured SFTP server does not support output stream, Backup Completed. We’ve verified th...
Hi, I met this bug in a Prime Infrastructure 3.1.7 (Update 5). When I start the scan of a 8510 WLC the collection fails with this output "Collection Status : Configured minimum sysUpTime value :0 doesnt met with the sysUpTime : 0 for the device 233...
Good Morning, we have actually DTMF problem with the same condition as this ticket : MTP CoLocated with ASR and OOB+2833 configured on the SIP Trunk. The IOS version on the ISR is not exactly the same : isr4400-universalk9.03.16.07b.S.155-3.S7b-ext.S...
Hi, Can you help with this issue please? BIOS: version 3.9.0NXOS: version 7.0(3)I4(4)BIOS compile time: 01/25/2016NXOS image file is: bootflash:///nxos.7.0.3.I4.4.binHardwarecisco Nexus3064 ChassisIntel(R) Celeron(R) CPU P4505 @ 1.87GHz with 3903432 ...
Is there any way to fix this issue temporarily, without reload of hardware.?
Does anybody know why Cisco does not want to support this syslog message any more? AUTHMGR-5-VLANASSIGN This is a syslog message related to MAB(Mac authentication Bypass.) Is Cisco planning to get rid of the support of the MAB technology? Than...
We are getting %HA_EM-6-LOG: capture_show_private information_status every hour and would like to know what is this for. I check show debugging on the router, and see no logging or debugging activated on the router. Does anyone know what I need to do...
Does anyone know if this bug was ever reproduced or ever fixed ? I am getting the same error message when trying to save a new rule to an Access Control Policy. Currently running the FMC at v6.3.0 as a VM. I am using Mozilla as the client browser. ...
Did you find any solutions? I´m having the same problem but the security violation is triggered by the mac-address of the VLAN that are assigned for the port. Model WS-C3650-24PS SW Version 16.3.5b
I've set up two lines on SEPMAC.cnf.xml file. The phones CP7821 (12-5-1-16) and CP8845 (12-5-1SR1-4) failed to register in first line. They are using authentication data from the second line.
OS admin login works with Subscriber. Does not work with Publisher. This issue is for only one account. other cli accounts are working fine
Can we have 2 separate ISE cluster as Trustsec AAA server. Customer has 2 ISE Cluster- Corporate and Guest and now they want to introduce micro segmentation in Guest Cluster also. Can the same WLC work as the Trustsec Client for both these AAA server...
Hi There Anyone seen this behaviour/issue with 16.06.04 or 16.06.x? Regards Marcel
The workaround is to use a new contract with the same service graph or for each contract we need also to apply a new service graph? In the current scenario (picture bellow), we got 1 L3out provider and a mix of L3Out and internal EPG with NO ISSUES...
