cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
616
Views
0
Helpful
3
Replies

Catalyst Center Provision SSID with mDNS

trapasso
Level 1
Level 1

Question for all those who are provisioning network profiles and setting to their Cisco 9800 WLC from Cisco Catalyst Center.

How are you provisioning an SSID that requires a mDNS Service list provisioned at the same time?  There does not seem to be a place to create the mdns Service List or how to link it to the SSID.

 

If I were to configure this manually on the 9800 wireless controller as part of a SSID, it is easy to do.  You create your mDNS Service List under menu Configuration > Services > mDNS on the 9800 WLC.  The in a policy profile for that SSID under the Advanced tab you can set the "mDNS Service Policy".  Nice and Easy and documented nicely in the C9800 docs. 

 

But I cannot find the equivalent in CCC.  In CCC as part of the SSID Design in a SSID under the Advanced SSID Configuration there is a mDNS Mode feature in the miscellaneous menu but nowhere to build a custom mDNS service List or where to apply this to a SSID.  

 

1 Accepted Solution

Accepted Solutions

trapasso
Level 1
Level 1

So I received some information about this post.  It sounds like this is in early field trials.  So hopefully included soon.

View solution in original post

3 Replies 3

trapasso
Level 1
Level 1

So I received some information about this post.  It sounds like this is in early field trials.  So hopefully included soon.

Leo Laohoo
Hall of Fame
Hall of Fame

If I was to do something like this, I would knock up the commands in CLI.  

And I manage 10 x 9800 and 8 x 8540 controllers.

That is exactly what I am about to do.