Solved: Re: configuration from DNA CENTER

willytech007 · ‎03-10-2022

Hi everyone

I have a doubt, how can I add/remove an access list entry from DNA Center to all of the switches added?

I have around 300 switches, I want to optimize this task and don't go manually switch by switch.

DNA Version: 2.1.2.7

Thanks for advice

Flavio Miranda · ‎03-10-2022

Hi

You need to work with Templates. Under Tool, Tamplete Editor, you can create a template with the configuration you want.

After that, you can associate this tamplate with network profile. On the network profile you can add as many device you want.

Once associanted, you can go to provision and provsion device and it´s done. You template will be applied to those switches.

This video may help you more than my explanation:

Flavio Miranda · ‎03-10-2022

Hi

You need to work with Templates. Under Tool, Tamplete Editor, you can create a template with the configuration you want.

After that, you can associate this tamplate with network profile. On the network profile you can add as many device you want.

Once associanted, you can go to provision and provsion device and it´s done. You template will be applied to those switches.

This video may help you more than my explanation:

willytech007 · ‎03-26-2022

Thanks for the help