Deploy to AI Enhanced RRM

[abe-shinta]

Hello , Professionals !!

I will propose to introduce AI Enhanced RRM for my customer.

so I read below document.

https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/technical-reference/ai-enhanced-rrm-dg.html

I seem this document says when Introduce AI Enhanced RRM ,
We should create AI RF Profile and assign WLC.

And I see that this setting is globally enabled in the WLC,
but is it possible to enable it only for a specific site or set a different AI RRM profile?

quote:Step 5: Select the location to assign the AI RF Profile

"AI-Enhanced RRM is enabled at the WLC level globally, just like RRM.
All sites having APs associated with the controller assigned to other buildings will also be managed by AI-Enhanced RRM"

Thank you for reading...

[Torbjørn · Accepted solution]

Hello @abe-shinta,

As described AI RRM is enabled globally per WLC. You can have multiple AI RRM wireless profiles on the same controller, but you cannot have non-AI RRM wireless profiles in use on an AI RRM enabled controller.

[abe-shinta]

@Torbjørn san

Thank you for your response !!!

I understood that multiple AI profiles can be created and that regular profiles cannot coexist.

Is it possible to use a method similar to a normal profile, such as assigning to each room?

[Torbjørn · Accepted solution]

AI RRM RF profiles are unfortunately not available when using AP zones. I would submit this to "Make a wish", and talk to your AM regarding this if it's an important requirement.

[abe-shinta]

@Torbjørn san
Thank you for your response！

I understood the details.

And I decided not to introduce as it does not seem to meet our requirements at this time.