06-02-2024 08:30 PM
Dear Community,
We have issue with ISE 3.1 P6 cannnot UI via web browser.
WE can CLI acess as normal.
Kindly advise or commend how to fix access on UI?
thanks,
06-03-2024 01:52 AM
- What error do you get in the browser when trying ?
M.
06-03-2024 04:03 AM - edited 06-03-2024 04:40 AM
Hello @marce1000 ,
This site can't be reached.
Try with below point already but no luck.
1. Reload node
2. application stop /start ise
3. application start ise safe
4. application reset-config ise
But CLI able access.
Thanks,
06-03-2024 04:50 AM
- Verify the (current) status of the ISE services with :
# show application status ise
M.
06-03-2024 05:13 AM
06-03-2024 05:21 AM
- Unreadable ; post output from 'direct asccii output' with cut and paste (e.g.)
M.
06-04-2024 11:26 PM
Look at all the services are running , is this single node or distributed deployment ?
have you tried different browsers ?
try from your PC telnet x.x.x.x 443 see is that open ?
show ports | in 443
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide