cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1306
Views
5
Helpful
3
Replies

NAD Provisioning Error NCSP10246

ChuckMcF
Level 1
Level 1

This discussion is intended as a way to share information about an issue we found with the Community. Hope this is helpful.

 

"Provisioning failed for <device name removed>. NCSP10246: Internal error while attempting to transform the object for further processing. Check the provisioning logs or contact the TAC."

 

We recently tried to reprovision a NAD and received the message above. All attempts at reprovisioning the NAD gave the same results. While SSH into the NAD with term mon enabled there was no indication that DNAC was even connecting to the NAD. Connectivity was verified as well as all other standard troubleshooting checkbox items.

 

While still connected to the NAD with term mon enabled I cleared all ports under Host Onboarding. At that point DNAC reached out to the NAD and made the changes. I then reconfigured the ports under Host Onboarding and after waiting for DNAC to close its SSH session I was able to successfully reprovision the NAD.

 

HTH,
Chuck McFadden


--please mark helpful posts as helpful--

3 Replies 3